Choosing a fan is not just a matter of comparing prices. The type of equipment defines how much air it can move, against what resistance, how much energy it will consume and how reliable it will be in demanding conditions. In mining and industry, a poor selection translates into insufficient ventilation, excessive power consumption or premature wear.
The two main families are axial fans and centrifugal fans. At Americorp Group we manufacture both lines under the Americorp Plus brand, and in this article we compare their differences so you can identify which one suits your operation.
How each type of fan works
In an axial fan, air moves in the same direction as the shaft, pushed by the propeller blades. This configuration makes it possible to move large volumes of air with a compact design that is in line with the duct.
In a centrifugal fan, air enters through the center of the impeller and exits radially, at 90 degrees. This principle allows it to generate higher pressure and handle flows that carry gases or dust.

Airflow and pressure: the basis of selection
Airflow indicates how much air must be moved and pressure indicates the resistance that must be overcome, such as long ducts, filters or deep workings. Our Americorp Plus axial fans reach capacities above 400,000 CFM and pressures of up to 24″ H₂O. Centrifugal fans cover airflows from 15,000 to more than 400,000 CFM.
Defining both values correctly avoids oversizing the equipment and paying for energy that is not needed.
Axial vs centrifugal fan: where each one is best
Industrial axial fans are a common choice in underground mine ventilation and tunnels, where large volumes of air must be extracted, injected or recirculated through ducts.
Centrifugal fans stand out when the system must move air, gases and dust in demanding environments, such as duct networks with high resistance or dust collection systems.

Beyond the type: efficiency and support
Fan selection must also consider energy efficiency, noise level, continuous operation and resistance to high temperatures. Our equipment incorporates automation and real-time monitoring, and comes with preventive and corrective maintenance provided by a specialized technical support team.
At Americorp Group we analyze the conditions of your operation to recommend the right fan and size your ventilation system.

